Weld On Ring - Electric & Mechanical. 40mm SQUARE

Brake assemby Weld On Ring

hole spacing 72mm x 72mm

Suit 10" Electric, 10" Hydraulic and 9" Mechanical

To suit LM (Holden) or Composite Axles - 40mm Square

If axle is machined back 26mm from inner bearing use 40mm round weld on ring.

IMPORTANT! Please check the positioning of the weld-on ring before permanently welding it in to place. Some axles may have a machined back area for placement, but do not expect it to be accurate for your product.

On square axles it may be particularly confusing as some will require a round hole and others will require a square hole. If in doubt, contact us first.